Baofeng DM-1701 - Color Code

3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to CTCSS, then press【MENU】to select.
6. Press【】/【】to CTCSS encode, then press【MENU】to select.
7. The screen shows turn off a group of CTCSS encode number, press【】/【】to close, then press【】/
【】to select, there is no CTCSS encode value, the screen shows CTCSS encode is closed;
• Press【】/【】to CTCSS encode value, then press【MENU】to select, which already set the corresponding
CTCSS encode value, the screen displays CTCSS encode XX.
 CTCSS decode
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to CTCSS, then press【MENU】to select.
6. Press【】/【】to CTCSS decode, then press【MENU】to select.
7. The screen shows turn off a group of CTCSS decode number, press【】/【】to close, then press【】/
【】to select, there is no CTCSS decode value, the screen shows CTCSS decode is closed;
• Press【】/【】to CTCSS decode value, then press 【MENU】to select, which already set the corresponding
CTCSS decode value, the screen displays CTCSS encode XX.
 Add Channel
Method of cooperating MENU:
1. Entering the menu via [MENU] button.
2. Press【】/【】to find SETTING, press [MENU] to confirm.
3. Press【】/【】to find CONFIGURATION, press [MENU] to confirm.
4. Input the correct configuration password (setting by programming), press [MENU] to confirm.
5. Press【】/【】to find Add Channel, press [MENU] to confirm.
6. Press【】/【】to select the channel, then press [MENU] to enter the relevant channel and add the
parameters.
 Color code
Color code refers to a system. The same color code is necessary for the terminals communicating with each other.
The frequency is the integer within 0~15. The color code only can be set in the digital model. Color code can mark
a system, and the terminals that communicate with each other must set the same color code. Method of
cooperating MENU:
1. Entering the menu via [MENU] button.
2. Press【】/【】to find SETTING, press [MENU] to confirm.
3. Press【】/【】to find CONFIGURATION, press [MENU] to confirm.
4. Input the correct configuration password (setting by programming), press [MENU] to confirm.
5. Press【】/【】to find Color code, press [MENU] to confirm.
6. Press【】/【】to select the color code, then press [MENU] to confirm. The color code selected will be in
the display.