Baofeng DM-1701 - Scan Functionality

2. DTMF number-> input corresponding number.
3. In the channel information, choose the corresponding receive signal system (same system as step 2) tick the
decode X (the same number as step 2)
4. When receive the corresponding DTMF number, the activation and remote kill function will be achieved.
Radio remote kill
Use the Menu function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to the contact list ,then press the【MENU】button to make a choice, entries are
in alphabetical order.
3.Press the【】/【】button to the required alias or ID, then press the【MENU】button to make a choice.
Or press the【】/【】button to manual dialing, then press the【MENU】button twice to input the user alias
or ID, and then press the【MENU】button to make a choice.
4.Press the【】/【】button to radio remote kill, then press the【MENU】button to make a choice.
5. The LCD shows the radio remote kill: <User alias or ID> and the red LED light flash.
6. Wait for confirmation.
7. If success, a beep sound, and the screen indicate the radio successfully remote killed.
• Or if failed, a beep sound, and the screen indicates it is failed to remote kill.
• During the remote kill period, please don’t press the【BACK】button, because you will not receive
the confirmation information any more.
Radio Activation
Use the Menu function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to the contact list ,then press the【MENU】button to make a choice, entries are
in alphabetical order.
3.Press the【】/【】button to the required alias or ID, then press the【MENU】button to make a choice.
Or press the【】/【】button to manual dialing, then press the【MENU】button twice to input the user alias
or ID, and then press the【MENU】button to make a choice.
4.Press the【】/【】button to radio activation, then press the【MENU】button to make a choice.
5. The LCD shows the radio activated: <User alias or ID> and the red LED light flash.
6. Wait for confirmation.
7. If success, a beep sound, and the screen indicate the radio successfully activated.
• Or if failed, a beep sound, and the screen indicates it is failed to activate.
• During the radio activation, please don’t press the【BACK】button, because you will not receive
the confirmation information any more.
Scan the list
The scan function helps you to receive the communication activity from other channels or groups call, further to
know the current activity of the relative team members. The radio can support up to 250 scan lists with a
maximum of 32 members. Every scan list supports the mix of analog and digital channels. You can add/delete
channel or prioritize channel by editing scan list.