Baofeng DM-1701 - Channel Name; Time-Out Timer; Ctcss

8. After the changes, press【MENU】, the screen shows that the transmitting frequency has been saved.
Note: According to frequency range of software limit frequency changes when editing and changing frequency, if
less than the frequency range of software, then the final change results will be the minimum value settings on the
software, the opposite is maximum.
 Channel name
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to channel name, then press【MENU】to select.
6. The screen shows the current channel name, then press【#】to switch input method to type the related letters,
numbers, or Chinese characters, and input methods are same as SMS editing.
7. After the changes, press【MENU】, the screen shows that the channel name has been saved.
 Transmit time-out timer
The setting of the time-out timer function prevents the user from occupying the channel for a long time. If the
continuous transmitting time exceeds the time set by the distributor, the radio will stop transmit and make the
warning sound. If want to stop the warning sound, please loose【PTT】. If you need to transmit again, please press
the PTT button again after a period of time (specifically set by the dealer)
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio configuration, then press【MENU】to select.
4. Use the keyboard to type the correct radio configuration password (software Settings), then press【MENU】to
select.
5. Press【】/【】to time-out timer, then press【MENU】to select.
6. The screen shows infinity, 15S, 30S... 555S option (additive increase in the range of 15S), press【】/【】 to
the corresponding option, then press 【MENU】to select, if you select to infinity, then the screen display turn off
the time-out timer, if you select others, the screen display xxS has been selected.
In the emergency alarm mode, this function is invalid.
 CTCSS
CTCSS can be set only under the simulated channel, includes:
• CTCSS encode
• CTCSS decode
 CTCSS encode
The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.