Off line
In case of the repeater failure or beyond the coverage of the repeater station, but both terminals are in the
other's communication range, at this time, you can press the【Off】 shortcut button to switch to the direct mode,
further to achieve directly communication between two terminals.
Press the pre-programmed 【Repeater / Off】 shortcut button to open the offline function; press this button
again to turn off this function.
The menu function operated as below:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to setting, then press the【MENU】button to make a choice.
3.Press the【】/【】button to radio setting, then press the【MENU】button to make a choice.
4.Press the【】/【】button to off line, then press the【MENU】button to make a choice.
5. If the radio is in the repeater station mode, the screen indicates “turn off”, or if the radio is under off-line mode,
the screen indicates “turn off”.
6. Press the【MENU】button to make a choice.
7. The screen indicates the off-line is turn on, the icon flash, or the screen indicates off-line is turn off.