5.Use the【MENU】button to make a choice.
6. When the scan is activated, the red LED indicator light flash, and the scan icon will appear in the screen;
Or when the scan is stopped, the LED light will be off and no scan icon is displayed.
Scan Reply
During scan, the radio will stop at the channel/group calls when the radio detect activity channel/group calls,
This is called as the pre-programmed time limit for the “Scan suspend time”
Progress:
1. Hold the radio in a vertical position and keep it 1-2 inches (2.5-5.0cm) from your mouth. If the function of
“Free channel beep” enabled. you will hear a short beep sound when release the 【PTT】button, this
indicates the channel is free and wait for your reply.
2.Press the【PTT】button during the suspend time. The LED light is red.
3.Release the【PTT】button to receive.
4.If you don’t response during the suspend time, the radio will go on scanning.
7. Menu setting
Menu setting including:
• Radio setting
• Radio information
• Radio configuration
Radio setting
You can make the following settings according to your own preferences and actual needs, so as to maximize their
performance.
The setting method: Enter into the menu “Setting ->Radio setting”, select the corresponding setting to set.
The setting items are as below list:
OFF: Turn off this function
Digital: Enable this tone only for digital channels
Analog: Enable this tone only for analog channels
To Next Page
Loading...
