8. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the SMS is being sent.
9. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, a high-pitched tone sounds and the screen shows that the message has
failed to be sent. If the message fails to be sent, the radio will return to the re-send selection screen.
■ Send Prefabricated SMS
This product supports at most 50 prefabricated SMS programmed by the agent.
When a text message is predefined, you can edit each message before sending it.
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to select “SMS”, press the【MENU】button to make a choice.
3.Press the【】/【】button to select “Prefabricated SMS”, press the【MENU】button to make a choice.
4.Press the【】/【】button to select required Prefabricated SMS ,press the【MENU】button to make a choice.
5. When blinking cursor appears, input the SMS by the keyboard, press the [◁] button to move to left one, press
the[▷ ]button to move to right one. press【BACK】button to delete any useless character when there are contents
in the edit area, or else it will return to the upper menu when there is no content in the edit area.
6.After finish the SMS content, press the【MENU】button to send or save.
7.When editing the SMS content, by pressing the【MENU】button to clear the options and clear all the edited
contents, can return to the upper menu firstly.
8.After send, press the【】/【】button to the required name or ID, then press the【MENU】button to make
a choice. Or press the【】/【】button to Manual Dialing, then press the【MENU】button to make a choice,
input the user ID and press the【MENU】button.
9. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the SMS is being sent.
10. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, a high-pitched tone sounds and the screen shows that the message has
failed to be sent. If the message fails to be sent, the radio will return to the re-send selection screen.
■ Use the one-touch call button to send prefabricated SMS
1. Press the pre-programmed one-touch call; send a prefabricated SMS to a predefined alias or ID.
2. The LCD shows the SMS :< User/Call group alias or ID>, confirm that the SMS is being sent.
3. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
Or if the message has not been sent, the screen shows that the message has failed to be sent. If the message fails
to be sent, the radio will return to the re-send selection screen.
Manage the failed SMS
In the re-send selection screen, you can choose below options:
• Re-send
• Forward
• Edit
Re-send SMS
1.Press the【MENU】button to re-send the same SMS to the same user/call group alias or ID.
2. If the message sent successfully, a beep sound, and the screen shows the message has been sent.
To Next Page
Loading...
