29 33
Level 2 menu
Contacts
New contact
Manual dialing
For
digital
mode
only
Level 3 menu
Contact list
Enter number
Alias
Tone
Enter number
Inbox list
Delete all
Options
View contacts
Quick configuration
Delete current contact
xxxx
Abcd
OFF
Tone 1~10
Call Alert
Radio Check
Remote Moni
Radio Active
Radio remote kill
List xxxx
es/No
Description of settings
View the contact name and number
Configure number 0~9 to the contact, select idle state to turn off
shortcut configuration
Delete current contact
Enter the contact number, up to 16777214, press the MENU button to
confirm or press EXIT to delete
Enter the name; support Chinese and English and special characters
There are 10 tones that can be selected. When the caller chooses to
enable the call prompt and the caller’s number is the new contact, the
unit issues this tone and the tone can be turned off if it is not necessary
Send call prompt to a contact, and the other party can call back directly
Initiate radio detection to a contact without interfering with each other
to confirm whether the other party has turned on the unit or uses in
the current channel.
Remotely activate the microphone of a contact, and monitor the voice
and background sound of the other party.
Send an activation command to a contact to resume normal use of
the two-way radio.
Send a remote inhibit command to a contact, so that the radio can’t
be used normally. Remote inhibited two-way radio can be remotely
monitored, but other functions can’t be used; it only allows re-writing
frequency through CPS software or activating the radio through
activation instructions
Unread , read ; press MENU to edit the contents, and
press MENU again to reply / forward / delete
Yes: Delete all No: Do not delete
Menu list
Level 1 menu Remark
Inbox
Contacts
SMS
To Next Page
Loading...
