PACKAGE VERSION SOURCE SITE
mtd 1.5.2
ftp://ftp.infradead.org/pub/mtd-utils
procps-ng
3.3.12
http://downloads.sourceforge.net/project/procps-ng/Production
strace 4.15
http://downloads.sourceforge.net/project/strace/strace/4.15
hidapi
0.5.2
https://github.com/signal11/hidapi
linux 3.1.0
https://mirrors.edge.kernel.org/pub/linux/kernel/v3.x/
sazanami-fonts 20040629
http://sourceforge.jp/projects/efont/downloads/10087
unfonts 1.0
http://kldp.net/frs/download.php/1425
dejavu-fonts
2.34
http://downloads.sourceforge.net/project/dejavu/dejavu/2.34
arphic-uming-fonts
20080216
http://archive.ubuntu.com/ubuntu/pool/main/t/ttf-arphic-uming
EN55032-CISPR32 Class B ITE (Information Technology Equipment)
This is a class B product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
If this equipment does cause interference to radio or television reception, the user may try to correct the
interference by one or more of the following measures :
• Re-orientation of the receiving antenna for the radio or television.
• Relocate the equipment with respect to the receiver.
• Plug the equipment into a different outlet so that the equipment and receiver are on different branch
circuits.
• Fasten cables connectors to the equipment by mounting screws.
Federal Communication Commission Interference Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: "How to Identify and Resolve Radio-TV
Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington D.C.
20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can
void your authority to operate this equipment under Federal Communications Commissions rules.
In order to maintain compliance with FCC regulations shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to result in interference to radio &
television reception.
FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11a mode. For 802.11a
devices operating in the frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to
To Next Page
Loading...
Need help?
General
Weight and Dimensions
