Federal Communication Commission Interference Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user ’s
authority to operate the equipment.
This equipm ent has been tested and found to comply with the limits for a Class A digital device, pursuant to P art 15 of the FCC Rules.
These limits a re designed to provide reasonable protection against harmful interference when the equipment is operated in a comm ercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio c omm unications. Operation of this equipment in a residential area is likely
to cause harmful interference in w hich case the u ser will be required to correct the interference at his own expense.
If this equipm ent does c ause interference with radio communications se rvices, which can be determined by turning t he equipm ent off and
on, you are encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to w hich the receiver is conn ected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device m ust accept any interference received, including interference that m ay cause undesired oper ation of t he device.
FCC RF Radiation E xposure Statement: This device is capable of operating in 802.11a mode. For 802.11a d evices op erating in the
frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mo bile Satellite
Services (MSS) in the US. W IFI Acc ess Points that are capable of allowing your device to op erate in 802.11a mode (5 .15 - 5.25 GHz ban d)
are optimized for indoor use only. If your WIFI network is capable of operating in this m ode, please restrict your WIFI use indoors to not
violate federal regulations to protect Mobile Satellite Services.
Base Unit FF C ID: RYK-WPE A-121N
Button FC C ID: 2AAED-CLSBTN
Compliance Anatel (Brasil)
1. Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução nº 242/2000, e atende
aos requisitos técnicos aplicados, incluindo os limites de exposição da taxa de absorção específica referente a ca mpos elétricos,
magnéticos e eletromagnéticos de radiofreqüência de acordo com as reso luç
ões nº 303/2002 e 533/2009. Para maiores informações,
consulte o site d a Anatel - w
ww.anatel.gov.br
2. Este equipam ento opera em c aráter secundár io, is to é, não tem direito a proteção contra interferência prejudicial, mesmo de estações
do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
Canada, Industry Canada (IC) Notice s
This device c omplies with Industry Canada licence-exempt RSS standard(s). Operation is s ubject to the following two conditions: (1) this
device may not cause interference, and (2) this device mu st acce pt any interference, including interference that may cause undes ired
operation of t he device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barc o Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. Th e Barco
Wireless Device should be used in such a m anner such that the potential for human contact during normal operation is minimized.
Base Unit IC ID: IC: 4104 A -AR5BHB 116
Button IC ID: 9393B -CLSBT N
IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only oper ate u sing an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry C an ada. To reduc e potential r adio interference to other user s, the antenna type and its gain should
be so chos en that the equivalent isotropically rad iated power (e.i.r.p.) is not m ore than that necessary for su ccessful comm unication.
This radio transmitter 4104 A -A R5BHB 116 has been approved by Industry Canada to operate w ith the antenna types listed below with
the m aximum permissible gain and required antenna impedanc e for eac h antenna type indicated. Antenna types not included in this list,
having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Type: Dipole
Maximum Peak G ain: 2 dBi
Impedance: 50 Ohm
To Next Page
Loading...
Need help?
General
