3. Getting Started
Your content is shown full screen on the display. If other persons were sharing their content on the display, their screens are
removed. Their Button’s LED s are now s hining white again.
user 5
5
4 users
4
12
3
Image 3-13
Single display
user 5
5
5
4 users
12 34
Image 3-14
Dual display
21
34
5
Image 3-15
Panoramic display
When you click again, your content is removed and the Base Unit shows the welco me screen ag ain. The
content of the previous users is not restored on the display.
3.4 Use of an iOS device with ClickShare Link
About using an iOS device with ClickShare Link
The c ontent of the iOS dev ice touchscreen can be displayed on the large meeting room display(s) as one of the possible sources.
The optional ClickShare Link mus t be installed in the mee ting room before an iOS device can pa rticipate by sharing its screen co n-
tent. For more information about the physical installation of ClickShare Link in combination with an iOS d evice, consult ClickShare’s
installation guide (R59000 04)
Necessary parts
• a ClickShare Link
• an HDMI cable
• optional: an iOS device HDMI adapter or an Apple TV
Connection with cable
1. Connect the iOS de vice HDMI convertor to your iOS de vice.
2. Connect the ClickS hare Link to the power and to a rear USB port of the B ase Unit.
3. Connect the HDMI port of the iOS device to the input of the C lickShare Link.
The content of the screen will be displayed on the meeting room screen.
R5900001 CLICKSHARE 22/12/2014
17
To Next Page
Loading...
Need help?
General
