R5910888 /00 G6026
4.1 On-Screen Display Menus
About OSD
The projector has On-Screen Display (OSD) menus that allow you to make image adjustments and change a
variety of settings.
Follow the steps below to use the OSD menu to configure the projector settings.
How to operate
1. To open the OSD menu, press Menu key on the control panel or remote control.
2. Use arrow keys to navigate through the menus and select appropriate settings.
3. Press Enter to enter the submenu or confirm a setting.
4. Press Exit to return to the previous menu or exit OSD menu if at top level.
Image 4-1
1 Main menu
2 Sub-menus
3 Settings
User controls
To Next Page
Loading...
