Barco G60 - Product Specification of the G60-W8

R5910888 /00 G60 47
Weight without lens: 16.9 kg / 37.3 lbs
Standard accessories Power cord, wireless remote control
Certifications CE, FCC Class A, cTUVUS, CCC, EAC, KCC, RCM, BIS, BSMI
Warranty Limited 3 years parts and labor
A.2 Product specification of the G60-W8
Specifictions
Projector type Single chip DLP laser phosphor projector
Resolution 1,920 x 1,200 (WUXGA)
Brightness 8,000 center lumens
Contrast ratio 1,200:1 sequential; 6,000:1 dynamic; Extreme black: 100,000:1
Brightness uniformity 85%
Aspect ratio 16:10
Lens type G-lenses - 0.36:1 / 0.75-0.95:1 / 0.95-1.22:1 / 1.22-1.52:1 / 1.52-2.92:1 /
2.90-5.50:1
Optical lens shift Up to 100% vertical lens shift, up to 30% horizontal lens shift. Motorized
zoom, focus, vertical and horizontal shift
Color correction Yes
CLO (constant light output) Yes
Light source Laser phosphor
Light source lifetime Up to 20,000hrs
Sealed DLP™ core Yes
Orientation 360° rotation, no restrictions
3D Active stereoscopic 3D
Image processing Embedded warp & blend possible via Ptoolset
Keystone correction Yes
Inputs 2x HDMI 1.4 / DVI-D / HDBaseT / 3G-SDI / VGA (D-Sub 15 pin) / RJ 45
Ethernet / RS232 in
Input resolutions Up to 1,920 x 1,200 @ 60Hz
Software tools Projector Toolset
Control IR, RS232, RJ45, 3.5mm phone jack for wired remote
Network connection 10/100 Ethernet, RJ45
Power requirements 100-240V / 50-60Hz
Power consumption 635W nominal, 730W maximum
BTU per hour 2,170 BTU/h nominal; 2,500 BTU/h maximum
Standby power < 0.5W
Noise level (typical at 25°C/
77°F)
36dB(A) - 40dB(A) depending on the used mode
Specifications