R5910888 /00 G6040
Network
View and configure the projector’s network settings.
• Projector Name : Display the projector name.
• Show Network Messages : Select On to display network information as on screen messages.
• Network Factory Reset : Reset the network settings to factory default settings.
Serial Port Baud Rate
Select a serial port and baud rate. The available options include 1200, 2400, 4800, 9600, 14400, 19200,
38400, 57600, and 115200.
Serial Port Echo
When set to On, the projector will return the serial command it receives. The user can view the command that
has been sent to the projector.
Serial Port Path
Select the serial port path for the serial commands. The available options are RS232 or HDBaseT.
User controls
To Next Page
Loading...
