K5902142 /04 Nio 5MP20
Enter
Cancel
Standby (IEC 60417–5009)
3.6 Viewing mode
About viewing modes
The Nio 5MP can be used in two viewing modes:
• Diagnostic: This mode provides the full calibrated luminance and is intended for using the display for
diagnostic purposes.
• Text: In this mode, the luminance is reduced to approximately half of the luminance. This is intended for
using the display with office applications such as word processing.
Please note that text mode is not persistent. Once powered off, the display will restart in diagnostic mode.
The diagnostic mode should always be selected when the Nio 5MP is intended to be used in a
diagnostic environment.
To quickly change the viewing mode
Press the Left and Right keys simultaneously during normal operation (while the OSD menu is not active) to
change the viewing mode.
Daily operation
To Next Page
Loading...
