Barco MDSC-8255 - Power Connection

K5902133 (451920612483)-02 MDSC-8255
20
Main
(1)
2nd
(2)
2 1
3
4
MP3
1
4
6
7
8
9 10
5
+5VDC
Image 3-2
WARNING: DisplayPort VESA DP 1.2 certified cables for 5.4 Gbps HBR2 are recommended.
The DVI output must be enabled in the OSD menu (please refer to “DVI output”, page 41).
A subset of the commands of the remote control protocol is also available on a new DDC protocol
on DVI and DisplayPort1 auxiliary channel.
3.2 Power connection
To connect the power
Connect the power input of your display with a grounded power outlet by means of the proper power cord
delivered with your display.
Main
(1)
2nd
(2)
Image 3-3
CAUTION: The display must be earthed.
Potential equalization
When potential equalization between the display and other devices is required then connect the potential
equalization pin (POAG) to the potential equalization terminal of the equipment.
Display installation