Barco MDSC-8255 - VESA Mount Installation

K5902133 (451920612483)-02 MDSC-8255
21
Main
(1)
2nd
(2)
Image 3-4
Additional protective earth
For additional grounding, earth the display by connecting the protective earth pin to a grounded outlet by
means of a wire with at minimum AWG18 size (according to national Regulation requirements regarding
maximum admitted cable length). Use the included M4 screw to attach the wire to the protective earth pin.
Image 3-5
3.3 VESA mount installation
To install the display on a VESA mounting solution
The display can be attached to a VESA 200 mm or VESA 600 mm arm or stand.
Image 3-6
The VESA mounting holes at the back of the display are provided with M6-type blind fasteners to fix the VESA
mounting plate. Depending on the VESA plate thickness (T) and the thickness of possible washers (W), a
different screw length (L) should be selected.
Please respect the following rule to select an appropriate screw length:
• L
min
= T + W + 8 mm
• L
max
= T + W + 11 mm
Display installation