K5902133 (451920612483)-02 MDSC-8255
34
• Mirror (flips the image horizontally, making the left content appear on the right and vice versa)
• Rotation (rotates the image 180°)
When image rotation is selected, the latency will increase with 20 msec. Image mirroring does not
cause any latency increase.
To enable/disable horizontal flip
1. Bring up the OSD main menu.
2. Navigate to the Picture Advanced menu.
3. Enter the Image Flip submenu.
4. Select one of the available options and confirm.
5.2.6 Screen Resolution
About screen resolution
This function allows you to adjust the image resolution of the preferred timing detailed in the EDID exposed to
the DP input and to the integrated Nexxis decoder.
The available options are:
• 4K (17:9) (for image resolution of 4096 x 2160)
• UHD (16:9) (for image resolution of 3840 x 2160)
Image resolution of the preferred timing detailed in the EDID exposed to HDMI-1 and HDMI-2 are
predefined as follows: HDMI-1 = 16:9; HDMI-2 = 17:9.
To enable/disable horizontal flip
1. Bring up the OSD main menu.
2. Navigate to the Picture Advanced menu.
3. Enter the Screen Resolution submenu.
4. Select one of the available options and confirm.
5.3 Input select menu
5.3.1 Main Source
About main sources
The available main sources for your display are:
• DVI
• SDI
• DisplayPort
• HDMI–1 (MDSC-8255 LED version only)
• HDMI–2 (MDSC-8255 LED version only)
• Nexxis (MDSC-8255 MNA version only)
Available main source options may differ depending on display model.
The main source can also be quickly selected through the Input selection key ( ), without the need
to navigate through the OSD menu.
To select the main source
1. Bring up the OSD main menu.
Advanced operation
To Next Page
Loading...
