R5914634 /00 MDSC-852722
4. Selector/Slider
5. Item value/setting
Grayed out menu items are not available on the specific display version or configuration.
To activate the OSD menu
1. Activate the front menu (see “Front menu ”, page 19).
2. Select the OSD main menu function (
).
As a result, the OSD main menu comes up. If no further actions are taken within the following 30 seconds,
the OSD menu will disappear again.
The time-out of the OSD menu automatic close function can be adjusted or disabled in the OSD
menu (OSD Time-out).
To navigate through the OSD menu
With the front keyboard:
• When the OSD menu is activated, a separate navigation menu appears just above the front keyboard.
Press the keys corresponding to the desired navigation option to navigate through the OSD menu.
• Press to confirm adjustments, press to exit the OSD menu and return to the front main menu.
With the rear keyboard:
• Press the up, down, right and left buttons to navigate through the OSD menus. The right button is used
to go into a submenu, the left button is used to return to a higher level menu.
• Press the center key to confirm adjustments (when is visible), or to exit the OSD menu and return to
the front main menu (when is visible).
3.6 Control lock
About the control lock
As described in “Control lock”, page 34, the control lock can be enabled to avoid unwanted access to the front
and OSD menu. When control is locked, the front menu cannot be accessed but will make the OSD lock
window appear. Only after pressing the correct sequence of keys, the front menu can be accessed.
OSD lock
Sequence: 5 - 6 - 6 - 3
Image 3–5
To unlock the menu
1. Unlock the front keyboard (see “Front keyboard locking/unlocking”, page 18).
2. When the OSD lock window appears, press the following key sequence to unlock the menu: left - right -
right - up
Daily operation
To Next Page
Loading...
