R5914634 /00 MDSC-852734
4.4.9 Profile name
About profile name
This function allows to define a name for each user profile.
To customize the name of a profile
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Profile name submenu.
4. Select one of the available profiles and move right to the name definition area.
5. Use the up/down arrows to select characters for up to 6 positions.
4.5 System menu
4.5.1 Control lock
About control lock
This setting allows you to avoid unwanted activation of any function through the front or rear keyboard. By
enabling the Control lock function, the front menu and OSD menu can only be accessed after pressing a
sequence of keys. Please refer to “Control lock”, page 22.
The available options are:
• Disabled
• Full lock: Both front and rear keyboard are locked
• Front lock: Front Menu and OSD menu are accessible though the rear keyboard only
To enable/disable control locking
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Control Lock submenu.
4. Select one of the available options and confirm.
4.5.2 Power saving
About power saving
When the selected input(s) is (are) missing (main, 2nd and failover), this setting allows the display to switch off
the backlight and enter a low power mode. As soon as the selected input(s) is (are) present again, the display
will exit the power save mode and display the image. Also, by activating the OSD menu, the display will exit
power save mode.
The available options are:
• Off
• 5 min
• 30 min
• 60 min
When the Auto search function is enabled (see “Main source”, page 28), the display will not enter
the power save mode, even when the input(s) is (are) missing.
To enable/disable power saving
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Power Saving submenu.
4. Select one of the available options and confirm.
Advanced operation
To Next Page
Loading...
Need help?
General
