Barco MDSC-8527 User Manual

33R5914634 /00 MDSC-8527
4.4.6 Front menu user keys
About front menu user keys
The MDSC-8527 has a front menu (see “Front menu ”, page 19) which supports 3 user key functions. These
user keys allow to immediately activate a commonly used function without having to access and browse the
OSD menus. Each user key is customizable and can have any of the following functions associated to it:
• Main source
• Brightness
• Color space
• DVI
• SDI
• HDMI 1
• HDMI 2
• DP
• Gamma
• Image flip
• PiP mode
• Profile
When a function is not available for the current display configuration, it will not be visible in the list.
To customize the front menu user keys
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the User Key 1/2/3 submenu.
4. Select one of the available user key functions and confirm.
4.4.7 Input signal name
About input source name
This function allows to define a name for each input source.
To customize the name of an input source
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Input Signal name submenu.
4. Select one of the available input source and move right to the name definition area.
5. Use the up/down arrows to select characters for up to 6 positions.
4.4.8 Display name
About display name
This function allows to define a name for the display device.
To customize the name of the display device
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Display name submenu.
4. Use the up/down arrows to select characters for up to 6 positions.
Advanced operation

Barco MDSC-8527 Specifications

General

Brand	Barco
Model	MDSC-8527
Category	Monitor
Language	English