Bard Site-Rite 6 - Settings; Date, Time, and Image Size Settings; Image Parameter Adjustments

24
Site~Rite
*
6 Ultrasound System
5 Settings
5.1 Date, Time and Image Size
To modify date, time and image size settings:
1. Press the Freeze button ( ) to pause the system.
2. Press and hold the Depth button (
cm) for more than 5 seconds to enter the time/image size mode.
The year field will then be highlighted. Release the Depth button.
3. PresstheDepthbutton(
cm) to select the desired date or time field to be modified.
4. Press the Gain buttons ( , ) to change the selected date or time values.
5. After setting the date and time, press the Depth button (
cm) to enter the image size field.
The current image size will be highlighted.
6. Press the Gain buttons ( , ) to select the desired image size.
7. Press the Freeze button ( ) to store the updated settings and resume normal operation.
5.2 Image Parameters
The Site~Rite* 6 Ultrasound System image may be changed from the factory default settings.
Contrast
• PressandholdtheDepthMarkerbutton(/:\)for5secondstotogglebetweenthehighandlow
contrast image.
Smooth/Sharp
• PresstheF5keytotogglebetweenasmoothandsharpimage.