BARIGO – Makes the Difference
1. Open up the battery compart-
ment on the reverse of the watch
by using a coin to turn it in an an-
ticlockwise direction.
2. Remove the old battery and the
white plastic cover.
3. Carefully clean the battery com-
partment. Make sure the ring
seal is undamaged. If there is
any damage, replace the com-
plete battery compartment cover
with a new one.
4. Place a new battery (+ Symbol
on top) into the battery com-
partment and put the white plas-
tic cover onto top of the battery.
5. Put the cover on the battery
compartment and use a coin to
turn it in a clockwise direction to
close the battery compartment tight.
To Next Page
Loading...
