BARIGO – Makes the Difference
3.3 Setting the time, date and key tone
The setting is made in the following order:
Hours → Minutes → Seconds → Year → Month → Date → Keytone.
The day of the week is set automatically.
All of these data are set by pressing the S1 (+) or S3 (-) button.
Press the S2 button to confirm your entry each time. This will take
you to the next available setting in the order shown above.
Setting, step by step guide:
1. Keep the S4 button pressed down in normal mode.
2. Use S1 or S3 to scroll to the SETTINGS menu item (Set-
tings) until it is shown in reverse in the middle of the dis-
play.
3. To make a selection, press the S2 button.
4. Use S1 or S3 to scroll to the sub-menu item TIME-DATE
(Time-date) and press the S2 button.
5. The hour flashes in the middle row of the display. Each
time you press S1 will increase the hour by 1. Each time
To Next Page
Loading...
