BARIGO – Makes the Difference
The measuring range for AltiSpeed lies between -300 m and +300
m. If the reading exceeds either range limit, only the maximum of -
/+300m per minute is displayed.
7.3 Synchronising altitude readings (1)
If the displayed altitude differs from the real altitude, carry out a
synchronisation as follows.
Keep the S5 button pressed in altime-
ter mode until ALTITUDE appears in
the top row and the altitude reading
flashes. Press the S1 or S2 button to
change this value (altitude reading).
Save the entered reading by pressing
S5.
Even after the current synchronisation
of the altitude reading, slight changes
To Next Page
Loading...
