BARIGO E7/E7S
9 Battery replacement
We recommend you replace the battery if the display on the BARI-
GO E7/E7S is weak or the backlighting is very hard to make out, or
if the battery indicator lights up.
After replacing the battery, you will need to re-set the date and time
and re-calibrate the compass.
Your BARIGO E7/E7S uses a Lithium button battery of type
CR2032.
Caution
Do not allow a used battery to remain in the watch for a longer
period of time as it may leak and damage your BARIGO E7/E7S.
The battery in your watch is very easy to replace by following these
steps:
To Next Page
Loading...
