BARIGO E7/E7S
First remove the protective film from the glass clock face and rear of
the watch.
If you purchased the watch new, it will be switched off even though
the battery has already been inserted.
To turn on the watch press the following buttons at the same
time S1 [BARO/LAP], S3 [ALTI/DATA], S4 [MODE/LOG] and S5
[LIGHT/SET].
The altitude readings displayed by the BARIGO E7/E7S come from
atmospheric pressure calculations
The CR2032, which comes with a pre-installed lithium battery, was
originally used for testing purposes and may have a short life.
To Next Page
Loading...
