barigo E7 - Page 30

BARIGO E7/E7S
30
Setting: a step by step guide:
1. Keep the S4 button pressed down in normal mode.
2. Use S1 or S3 to scroll to the ALARM menu item until it is
shown in reverse in the middle of the display unless it is not
already displayed.
3. To make a selection, press the S2 button.
4. Use S1 or S3 to scroll to the option (Alarm 1/2/3 or chime)
you want to set.
5. For setting the chime, continue from Step 12.
6. Keep the S5 button pressed down until the hours in the
middle row of the display flash.
7. Each time you press S1 the hour will increase by 1. Each
time you press S3 the hour will decrease by 1. To move
through the hours more quickly, keep the S1 or S3 buttons
pressed down.
8. Press the S2 button to set the minutes, as described for the
hours (see above).
9. Next, confirm the alarm you set with the S5 button.