barigo E7 - Page 42

BARIGO E7/E7S
42
Setting: a step by step guide:
1. Keep the S4 button pressed down in normal mode.
2. Use S1 or S3 to scroll to the TIMER menu item until it is
shown in reverse in the middle of the display.
3. To make a selection, press the S2 button.
4. Keep the S5 button pressed down until the hours in the
middle row of the display flash.
5. Each time you press S1 the hour will increase by 1. Each
time you press S3 the hour will decrease by 1. To move
through the hours more quickly, keep the S1 or S3 buttons
pressed down.
6. Press the S2 button to set the minutes, as described for the
hours (see Step 5).
7. Press the S2 button to set the seconds, as described for
the hours (see Step 5).
8. Next, confirm the start time you set with the S5 button.
9. Press the S4 button twice to return to normal mode (watch
mode) or press the S1 and S3 buttons to make additional
settings.