BARIGO – Makes the Difference
The barometer function is not available during log record-
ing. In the time and compass mode, if you press the S1
button for the barometer, the message LOG MEMORY
ACTIVE appears. After, the display returns to the mode
you were in when you pressed the S1 button down.
The memory can record up to 30 logs. When saving more
than 30 logs, the oldest logs get overwritten.
Caution
Temporary changes in altitude, such as climbs or descents
under a minute, are not recorded by the memory.
Slight changes in height, such as 1-3 metres, are ignored
by the memory since they may have been caused by a
change in the weather (atmospheric pressure). As a result,
hikes in a flat environment, where more than 50 altitude
points are not recorded within one to two hours, are not
picked up by the memory.
To Next Page
Loading...
