User Manual “Instreamer“ - V3.17 - 25th July 2011
Gateway IP Address
A correct setting of the Gateway IP address is
needed to stream to the Internet or to destinations
outside your local network (LAN).
Enter the 4 values of the desired Gateway IP
address e.g.:
• "0.0.0.0" for no Gateway or automatic discovery
• "192.168.0.1" for a Gateway in a LAN
Note: If you have set the devices IP address to
automatic discovery and your server or router has
issued an IP address then most probably it also has
supplied a valid Gateway address, “0.0.0.0” will then
work fine.
If you have set a Static IP address then you will need
to configure a valid Gateway address manually. Try
first the same Gateway IP address your PC is set to.
If it doesn’t work then ask your Network
Administrator for a correct Gateway IP address.
DHCP Host Name
From version VB3.17 a DHCP host name can be
configured for the device. If this field is left blank then
the device creates a DHCP name using part of the
Ethernet MAC address e.g.“CO1ED04” where ED04
are the 2 least significat bytes of the MAC.
Use SonicIP
If “Use SonicIP” is set to yes, the device will
announce its IP address over the audio output during
start up.
18 Device Configuration
To Next Page
Loading...
