User Manual “Instreamer“ - V3.17 - 25th July 2011
Stream to Shoutcast source entry
Set the connection type to “Shoutcast source” to
connect (TCP) to a single Shoutcast server. Enter IP
and port of the Shoutcast server for the device to act
as a Shoutcast source. When authentication is
needed please read also section Ice/Shoutcast
(Security settings).
The IP “0.0.0.0” will let the Instreamer act as a
Shoutcast server itself waiting for a connection on
the port selected under “Port#”. The function is then
limited to a single client (a media player like
Winamp) and only one entry is allowed to be set to
Shoutcast server (IP 0.0.0.0).
IP Address
Enter 4 values of the destination IP address e.g.:
"0.0.0.0" for unused destinations (except when the
connection type is set to UDP it will be broadcasted
e.g. "192.168.0.255").
"0.0.0.0" for connection TCP + Port if this device is
used as a TCP listener waiting for a connection from
a streaming device. (default)
"192.168.0.34" for a directed connection
"192.168.0.255" for a broadcast
Default settings for the first entry is "RTP
0.0.0.0:4444".
Default settings for other entries is "Internet Radio
0.0.0.0:0".
Domain Name
If an active connection is required within the first 4
entries, a Domain Name or an IP address can be
provided. An example of a Domain Name is
www.myserver.com. If an IP address is provided,
e.g. 192.168.0.34, then this is used, otherwise the
device attempts to obtain the IP address from a
Domain Name Server.
Device Configuration 31
To Next Page
Loading...
