Bartec POLARIS BASIC - Configuration Menu Navigation

POLARIS BASIC- for Zone 1/21
POLARIS Panel PCs 5.7" / 10.4" / 12.1"
Operation
Technical data subject to change.
06/2017
EN 37/45
Download via PROFIBUS is not possible.
Transfering a project with BMS-Graf pro to the POLARIS
– Select the menu item with the “Enter” button.
– Enter the password.
– Download starts.
– Exit download with the “ESC” button.
– Create project in BMS-Graf-pro and transfer to the POLARIS using a USB stick.
– Select menu item with the “Enter” button.
– Enter the password.
– Insert USB stick (with project in the created folder BGXP2005).
– Start transfer by pressing the “Enter” button.
– Select menu item with the “Enter” button.
– Displays all available languages.
– Change to selected language using the “Enter” button.
– Select menu item with the “Enter” button.
– Enter the password.
– Optionally create new password.
– Confirm change.
– Return to the SETUP menu.
– Select menu item with the “Enter” button.
– Enter the password.
– Change the time/date using the cursor buttons.
– Adopt the new values using the “Enter” button.
– Select menu item with the “Enter” button.
– Enter the password.
– Enter new slave number using keypad.
– Adopt the new values using the “Enter” button.