9440300990 32-17
DECS-250 Analog Expansion Module
Figure 32-20. Remote Analog Input Temperature Calibration
Analog Outputs
BESTCOMSPlus® Navigation Path: Metering, Status, Outputs, Remote Analog Outputs
HMI Navigation Path: Metering, Status, Outputs, Remote Analog Outputs
The status of the remote analog outputs, scaled analog output values, and raw analog output values are
shown on this screen. Parameter selections are made on the Remote Analog Outputs screen under
settings in BESTCOMSPlus. The status is TRUE when the corresponding LED is green. Refer to Figure
32-21.
Figure 32-21. Remote Analog Outputs Metering
Maintenance
Preventive maintenance consists of periodically checking that the connections between the AEM-2020
and the system are clean and tight. Analog Expansion Modules are manufactured using state-of-the-art
surface-mount technology. As such, Basler Electric recommends that no repair procedures be attempted
by anyone other than Basler Electric personnel.
Firmware Updates
Refer to the BESTCOMSPlus
®
chapter for instructions on updating firmware in the AEM-2020.
To Next Page
Loading...
