31
Halogen or LED11.2
Switch on/off with ‘autoswitch’
Settheswitch(A)toOn,OfforAutomatic.IntheAuto-
matic position, the lamp will be activated when it gets
dark and the bicycle is moving.
Adjust the light beam
The nut (C) for adjusting the position of the light beam
of the head lamp can be found below the cap (B).
Head lamp integrated in the fork11.3
Switch on/off with ‘autoswitch’
Settheswitch(A)toOn,OfforAutomatic.IntheAuto-
matic position, the lamp will be activated when it gets
dark and the bicycle is moving.
Adjust the light beam
Adjust the position of the light beam using the wheel (B).
Head lamp with batteries11.4
Switch on/off
Press the button (A) to switch the lamp on or off.
Adjust the light beam
Adjust the position of the light beam using nut (B).