Batavus Hybride - Lighting Faults and Solutions

32
Head lamp through (hub) dynamo11.5
Switch on/off
Press the button (A) to switch the lamp on or off.
Adjust the light beam
Adjust the position of the light beam using nut (B).
Faults in lighting11.6
Possible cause Possible solution
The wire has been interrupted. Checkthewirefor:
ifit’sattachedtothelampandthedynamo;•
corrosion;•
a piece of rubbed blank wire (short circuit) •
or split.
Batteries low. Change the batteries.
A
B
1