CAUTION!
No simultaneous sensor self-test
with two-channel evaluation
The sensor self-test must not set the two ch
annels for two-channel evaluation to LOW
simultaneously.
Installation
Operation Manual Safety I/O Terminals SI4000 / SO4000
Document no.: 5.08009.05 Baumüller Nürnberg GmbH
50
of 82
7.1
7.1.8.3 SO4000 parameter overview
PrmName Meaning Values
S_Address Dip switch address 1 to 1023
Channel 1 Activation of channel 1 active/not active
Channel 2 Activation of channel 2 active/not active
Channel 3 Activation of channel 3 active/not active
Channel 4 Activation of channel 4 active/not active
To Next Page
Loading...