EasyManua.ls Logo

Bavaria Vision 46 - Maintenance; Electrical System Maintenance

Bavaria Vision 46
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Owner‘s manual
74
9. Maintenance
Caution
» Modicationsthatmayaffectthesafetycharacteristicsofthecraftshouldbeassessed,
executed and documented by competent people.
» Anychangeinthedispositionofthemassesaboardmaysignicantlyaffectthestability,
trim and performance of the boat
9.1. Maintenance of the electrical system
i
Information
» Check all terminals for corrosion - corroded terminals and connectors should be replaced or
thoroughly cleaned.
» Tighten all terminals securely and spray them with light marine preservative oil.
» Check if all cables are securely fastened and that there are no signs of chafe or defects.
» Havecorrodedterminalsreplacedbyacompetentperson.
Caution
» Topreventarcingordamagetothealternator,alwaysdisconnectbatterycablesbeforedo-
ing any work on the engine‘s electrical system.
» Power feeds for accessory equipment must not be taken from the voltmeter terminals.
Warning
» Work on electrical wiring can create shock hazards or sparks.
» Alwaysdisconnectpowersources
andshutoffbatteryswitch,breakersand/orpullfuses
before checking electrical wiring or connectors.

Table of Contents

Other manuals for Bavaria Vision 46

Related product manuals