36
PREPARING THE MACHINE | Arterial Blood Line
The machine is ready to be lined once the blood pump button is flashing.
1. Blood pump*
2. Blood line guide
3. Dialyzer connection
4. Blood line guide
5. Arterial line clamp
6. Saline or priming bag
7. Arterial patient connector
8. Arterial pressure transducer connector
9. Heparin pump
*Make sure the blood pump segment collars are outside the pump
housing and that the heparin line is placed on top
3
1
2
4
5
8
9
6
7
NOTE:
To achieve the correct blood flow, ensure that the inner diameter of the blood line pump segment of the blood line used corresponds to the
set blood line pump segment diameter on the machine
NOTE:
The connectors of the arterial blood line are red, but the blood lines may differ in appearance
HC10139 |
To Next Page
Loading...
Need help?
General
