baxter ML-132516 User Manual

– 15 –
PROGRAMMING THE OVEN
Single Step Recipes
The recipe menu stores up to 99 recipes that can be recalled by number when needed. A recipe is a set
of baking instructions (temperature, bake, steam and fan delay settings) that the operator denes for any
baking operation.
1. With the oven in the OFF mode, press and hold the UP arrow in the STEPS section. While pressing
and holding the UP arrow, press the POWER ON OFF button for 3 seconds. When the beep sounds,
the oven is in recipe mode.
2. Press the RECIPE UP or DOWN arrows until the recipe number that is desired is displayed.
3. Press the TEMP UP or DOWN arrows to enter the desired temperature.
4. Set the Bake, Steam, Delay Fan and Vent settings:
• Press the UP or DOWN arrows next to BAKE TIMER to enter the desired time.
• Press the UP or DOWN arrows next to STEAM TIMER to enter the desired time. If no time is
needed enter 0.
• Press the UP arrow next to FAN DELAY to enter the desired time. If no delay is required leave
set at 0.
• Press the VENT button to vent the cavity for the entire time of the step. For vent button location
see illustration on page 8. Vent button is located in the lower right hand corner of the control
panel. When step is complete, vent will close.
5. To store the recipe, press the RECIPE UP or DOWN arrows to move to the next recipe number or
press the POWER ON OFF button to exit the recipe mode.
6. To store additional recipe settings, repeat steps 2 to 4.
7. Record recipe numbers and product associated with them.

baxter ML-132516 Specifications

General

Brand	baxter
Model	ML-132516
Category	Oven
Language	English