baxter ML-132516 User Manual

– 31 –
Inspect Oven Lamps
1. Lamps should be on when oven is powered.
2. If not, replace lamps.
A. Twist lamp cover (Fig. 4) to disengage from lamp
sockets and remove from socket.
3. Reverse procedure to install new lamp.
Clean and Vacuum Components and Burner Area
1. Clean the burner chamber (Fig. 5) area of dust and/or
lint accumulation.
A. Remove screw securing control panel door and
swing door open to access burner chamber
area.
B. Vacuum the burner chamber area of dust and/or
lint accumulation.
NOTE: Individual burners may be inspected for clogs or debris
without removing individual burners.
2. Check and clean all air passageways.
A. Clean all burner chamber air passageways of
dust and/or lint accumulation.
3. Clean convection panel grill.
A. Clean convection panel grill (Fig. 6) of dust and/
or lint accumulation.
4. Clean draft inducer housing grill guard (Fig. 7).
A. Access draft inducer housing on top of
oven and clean grill cover of dust and/or lint
accumulation.
Fig. 4
Fig. 5
Fig. 7Fig. 6

baxter ML-132516 Specifications

General

Brand	baxter
Model	ML-132516
Category	Oven
Language	English