BayTech DS9 - Ds Series Module Configuration

DS-SERIES OWNER’S MANUAL
DS SERIES QUICK START
7
DS SERIES MODULE CONFIGURATION
Accessing Configuration From the DS-Series Main Menu, select
Menu C, “Configuration,” followed by <cr>. The
following selection menu appears:
Configuration
Module 1 ................................................1
Module 2 ................................................2
Module 3 ................................................3
Select Port .............................................S
Exit ........................................................X
Enter Request :
To configure a module, enter the number
associated with it, followed by <cr>. For
detailed configuration of each module refer
to:
DS71 or DS71-MD2 page 24
DS74 page 49
DS73 page 51