BayTech DS9 - Operation; Accessing the Main Menu

DS-SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
18
OPERATION
ACCESSING MAIN Power on the DS-SERIES unit. The
MENU following header and main menu appears
if using the DS71:
Data Switch Series - F.2.01
Bay Technical Associates
Unit ID: DS71
Port Select Code: $BT
Attention Character: ;
Device A (2,1)...............1
Device B (2,2)...............2
Device C (2,3)...............3
Device D (2,4)...............4
Configure.................................C
I/O Modules Reset..................RM
Unit Reset................................RU
Exit.........................…...............X,
Logout.......................................T
Enter Request:
NOTE: The DS71 and DS71-MD2 have some menus which are
different. Where this situation occurs it will be addressed.
Or this menu if the DS71-MD2 is used:
Data Switch Series - F.0.13
Bay Technical Associates
Unit ID: DS71-MD2
Port Select Code: $BT
Attention Character: ;
Use the “Attention Character” to display the
remainder of the menu.
Device A (2,1)...............1
Device B (2,2)...............2
Device C (2,3)...............3
Device D (2,4)...............4
Configure.................................C
I/O Modules Reset..................RM
Unit Reset................................RU
Exit.........................…...............X
Logout.......................................T
Enter Request: