POWER
CAUTION: This unit is intended for indoor use only. Do not
install near water or expose this unit to moisture. To prevent heat
buildup, do not coil the power cord when in use. Do not use
extension cords. Do not attempt to make any internal changes to
the power source. Do not attempt to modify any portion or
component of a DS-Series Data Switch unless specifically directed
to; as in Appendix E of this manual. BayTech must perform any
internal changes.
CAUTION: High-voltage surges and spikes can damage this
equipment. To protect from such power surges and spikes, this
unit must have a good earth ground. A grounding screw connection
is located near the power switch on the back of the unit.
CAUTION: Before removing or replacing any modules, turn off
main power switch located on the DS-Series Base Unit.
Communication to the DS-Series Data Switch will be disrupted
while power is off.
To Next Page
Loading...
Need help?
General
