Operating instructions B-Series
Version 2.4, En Page 10 of 81 21-10-2005
Safety
Marks on the pump:
Always note the marks on the pump (the arrow showing the direction of rotation or symbols marking the
liquid connections). Make sure that these signs are and remain readable.
Target group for these operating instructions:
The following persons must have read and understood all the operating instructions:
• Operating personnel and personnel responsible for the working of the pump unit;
• Personnel responsible for the installation and bringing into use of the pump and pump unit;
• Personnel responsible for periodic maintenance and inspection.
The company management must ensure that all maintenance, inspection and assembly activities are
carried out by competent and qualified personnel. Their responsibility and whoever who is to supervise
this must be precisely established by the company management.
If the personnel have insufficient knowledge, the company management must ensure good training that is
provided by the supplier or producer of the pump.
The company management must also ensure that the contents of this manual are fully understood by both
technical and service personnel, as well as persons responsible for ordering spare parts. In the following
sections they will find the necessary information about the identification of pump types, variants and
spare parts.
Dangers associated with non-compliance with safety instructions:
Non-compliance with the safety and operating instructions will lead to the invalidity of any form of
guarantee.
Non-compliance with the safety instructions can, for example, have the following consequences:
• Danger to persons due to electrical, mechanical and chemical influences.
• Failure of the specified maintenance and service procedures.
• Failure of the most important functions of the machine/installation.
• Danger to the environment due to the leakage of hazardous substances.
Safety-conscious working:
The safety instructions mentioned in the operating instructions must be complied with at all times. Locally
prevailing safety instructions are also of the utmost importance. The company management is responsible
for compliance with all prevailing safety instructions.
Impermissible actions:
The safe operation of the pump supplied is only guaranteed if it is used as intended and specified. This
pump was designed based on the specified operating conditions
To Next Page
Loading...
Need help?
General
