Operating instructions B-Series
Version 2.4, En Page 8 of 81 21-10-2005
2 Introduction
These standard operating instructions apply for the standard versions of the B- and B(Ex)-series.
2.1 Instructions for use
The information published in these operating instructions is based on the most recent information. It is
provided with the reservation of subsequent changes. We reserve the right to at any time change the
construction and/or design of our products, and this without any obligation to adapt goods supplied earlier
by us.
These operating instructions contain useful and important information for the good functioning and
maintenance of your pump. They also contain important instructions for bringing the equipment into use
and for during the operation of the pump. Instructions are also provided to prevent possible accidents or
serious damage, and to allow the safe and problem-free working of your pump. Read the operating
instructions thoroughly before operating the pump. Become familiar with the working and operation of
your pump, and carefully comply with the information and instructions. In this respect we emphasise the
importance of training (by the supplier) in correctly working with the pump. It is important for these
operating instructions to be kept in a set place in the vicinity of the pump.
For information concerning setting, maintenance activities or repairs you are requested to contact
our service department. In that case always mention the type of pump and serial number.
Distrimex Pompen & Service BV
Tel : +31 (0)314 368 444
Fax : +31 (0)314 33 50 47
To Next Page
Loading...
Need help?
General
