Operating instructions B-Series
Version 2.4, En Page 63 of 81 21-10-2005
11 Maintenance
In this section we describe the instructions for maintenance of the pump/pump unit
•
general
•
preparation
•
tools
•
switching off
•
motor protection
•
preservation
•
external cleaning
•
electrical installation
•
draining
•
specific parts
•
back-pull out
•
spacer coupling
•
overhaul advice
11.1 General
Inappropriate, incorrect and/or not regularly carried out maintenance can lead to failures in the operation
of the pump/pump unit, danger to the user, high repair costs and long-lasting unavailability. So follow the
instructions in this section carefully.
BBA Pompen BV is not responsible for accidents or damage caused by not respecting these instructions.
Only have maintenance work carried out by qualified personnel. Always wear
the necessary clothing for protection against high temperatures and harmful
and/or aggressive liquids.
Have personnel read the whole user manual, and particularly point out the
paragraphs concerning the work that has to be done.
Opening without
danger:
In the case of pumping volatile and/or dangerous liquids the
dangers of these substances must be taken into account
when opening.
For information concerning setting, maintenance activities or repairs you are requested to contact
our service department.
Distrimex Pompen & Service BV
Telephone : +31(0)55 368 18 30
Fax : +31(0)55 368 18 31
To Next Page
Loading...
Need help?
General
