BBA Pumps B Series User Manual

Operating instructions B-Series
Version 2.4, En Page 17 of 81 21-10-2005
3.4.3 Shaft seal
B
Silicon carbide (sic)/Silicon carbide (sic) elastomers FPM (Viton

).
BE
Silicon carbide (sic)/Silicon carbide (sic) elastomers EPDM.
B+W
Silicon carbide (sic)/Silicon carbide (sic) elastomers FPM (Viton

), sealing water.
BE+W
Silicon carbide (sic)/Silicon carbide (sic) elastomers EPDM, sealing water.
BV
Silicon carbide (sic)/Silicon carbide (sic) elastomers, FPM(Viton

), grease-cooled
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
BEV
Silicon carbide (sic)/Silicon carbide (sic) elastomers EPDM, glycerin/antifreeze.
BV+W
Silicon carbide(sic)/Silicon carbide(sic) elastomers, FPM (Viton

), grease-cooled,
sealing water.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
BEV+W
Silicon carbide (sic)/Silicon carbide (sic) elastomers EPDM, glycerin/antifreeze, sealing
water.
BU
Silicon carbide (sic)/Silicon carbide (sic) elastomers FPM(Viton

), oil-cooled
BEU
Silicon carbide (sic)/Silicon carbide (sic) elastomers EPDM , glycerin/antifreeze.
BU+W
Silicon carbide(sic)/Silicon carbide (sic) elastomers FPM(Viton

), oil-cooled, sealing
water.
BEU+W
Silicon carbide (sic)/Silicon carbide(sic) elastomers EPDM, glycerin/antifreeze, sealing
water.
BS
Silicon carbide (sic)/Silicon carbide (sic) elastomers FPM(Viton

), water-cooled
BES
Silicon carbide (sic)/Silicon carbide (sic) elastomers EPDM, water-cooled
BSW
Silicon carbide(sic)/Silicon carbide(sic) elastomers FPM(Viton

), sealing water
BESW
Silicon carbide(sic)/Silicon carbide(sic) elastomers EPDM, sealing water
BSW+U
BSW + oil cooling
BESW+U
BESW + glycerin/antifreeze.
TW
Silicon carbide (sic)/Silicon carbide (sic) elastomers FPM (Viton

),
Standard grease-cooled. With the exception of B150, B200, B250 and B300 these have
standard oil cooling.
TW + W
Silicon carbide (sic)/Silicon carbide(sic) elastomers FPM(Viton

), sealing water.
Standard grease-cooled. With the exception of B150, B200, B250 and B300 these have
standard oil cooling.
T1W
Coal/Ceramic/elastomers Nitrile, grease-cooled, only available as standard with B40,
B45 and B50.
T1W + W
Coal/Ceramic/elastomers Nitrile, grease-cooled, only available as standard with B40,
B45 and B50, sealing water.
T2W
Coal/Ceramic/elastomers, FPM(Viton

), grease-cooled, only available as standard with
B40, B45 and B50.
T2W + W
Coal/Ceramic/elastomers, FPM(Viton

), grease-cooled, only available as standard with
B40, B45 and B50, sealing water.

BBA Pumps B Series Specifications

General

Brand	BBA Pumps
Model	B Series
Category	Water Pump
Language	English