BBA Pumps B Series - Page 19

Operating instructions B-Series
Version 2.4, En Page 18 of 81 21-10-2005
T3W
Hard metal/Hard metal/elastomers FPM(Viton

).
Standard grease-cooled. With the exception of B150, B200, B250 and B300 these have
standard oil cooling.
T3W + W
Hard metal/Hard metal/elastomers FPM(Viton

), sealing water.
Standard grease-cooled. With the exception of B150, B200, B250 and B300 these have
standard oil cooling.
T4W
(120)
Silicon carbide (sic)/Silicon carbide(sic), elastomers PTFE, grease-cooled.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
T4W+ W
(120)
Silicon carbide (sic)/Silicon carbide(sic), elastomers PTFE, grease-cooled, sealing
water.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
T4W
(130)
Silicon carbide (sic)/Silicon carbide(sic), elastomers, PTFE, grease-cooled.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
Not available for B40.
T4W
(130)
Silicon carbide (sic)/Silicon carbide(sic), elastomers, PTFE, grease-cooled.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
Not available for B40.
T4W + W
(130)
Silicon carbide (sic)/Silicon carbide(sic), elastomers, PTFE, grease-cooled, sealing
water.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
Not available for B40.
T5W
(120)
Silicon carbide (sic)/Silicon carbide (sic), elastomers, FPM(Viton

) grease-cooled.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
T5W+ W
(120)
Silicon carbide (sic)/Silicon carbide (sic), elastomers, FPM(Viton

) grease-cooled,
sealing water
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
T10W
(130)
Silicon carbide (sic)/Silicon carbide(sic), elastomers, FPM(Viton

) grease-cooled.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
Not available for B40.
T10W +
W (130)
Silicon carbide (sic)/Silicon carbide(sic), elastomers, FPM(Viton

), grease-cooled,
sealing water.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
Not available for B40.
T6W
(120)
Coal/ceramic/elastomers PTFE, grease-cooled.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
T6W+ W
(120)
Coal/ceramic/elastomers PTFE, grease-cooled, sealing water.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
T7W
(130)
Coal/ceramic/elastomers, PTFE, grease-cooled.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
Not available for B40.
T7W + W
(130)
Coal/ceramic/elastomers, PTFE, grease-cooled, sealing water.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
Not available for B40.
T8W
(120)
Coal/ceramic/elastomers, FPM(Viton

) grease-cooled.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.