BBA Pumps B Series - Page 20

Operating instructions B-Series
Version 2.4, En Page 19 of 81 21-10-2005
T8W+ W
(120)
Coal/ceramic/elastomers, FPM(Viton

) grease-cooled, sealing water
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
T9W
(130)
Coal/ceramic/elastomers, , FPM(Viton

) grease-cooled.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
Not available for B40.
T9W + W
(130)
Coal/ceramic/elastomers, FPM(Viton

) grease-cooled, sealing water.
With the exception of B150, B200, B250 and B300 these have standard oil cooling.
Not available for B40.
Back to Back mechanical seal.
B-BTW
Part 1: Silicon carbide (sic)/Silicon carbide (sic) elastomers FPM(Viton

).Part 2:
Silicon carbide(sic)/Silicon carbide(sic) elastomers, FPM(Viton).
Version in consultation with BBA Pompen.
B-BTW +
W
Part 1: Silicon carbide(sic)/Silicon carbide(sic) elastomers. FPM(Viton

).Part 2:
Silicon carbide(sic)/Silicon carbide(sic) elastomers, FPM(Viton). sealing water.
Version in consultation with BBA Pompen.
Cartex
Version in consultation with BBA Pompen BV.