RS485 Star Card Manual V14 4Feb04.doc Page 19/29
PELCO P and PELCO D.
Function TX1500 Procedure Pelco Procedure
Display Dome Menu
1 #
SAVE PRESET 95
180 degree pan flip (U turn)
2 #
GOTO PRESET 33
Display Technicians Menu
3 #
GOTO PRESET 94
Start Random Scanning
PATROL 1
GOTO PRESET 97
Start Frame Scanning
PATROL 2
GOTO PRESET 98
This allows control of Pelco P and Pelco D units. Please ensure that the baud rate and
parity are set correctly. Generally Pelco P uses 9600,N,8,1 and Pelco D uses 2400,N,8,1.
To Next Page